Compared with honeycomb aluminum veneer, aluminum veneer is easier to bend and form complex shapes, which can better adapt to the ever-changing needs of architectural exterior decoration. It is generally considered that aluminum veneer is the best curtain wall material.

Aluminum veneer generally after chromium treatment, and then use fluorocarbon spraying treatment. Fluorocarbon coating mainly refers to polyvinylidene fluoride resin, divided into primer, topcoat, varnish three. Generally divided into two, three or four coating. Fluorocarbon coating has excellent corrosion resistance and weather resistance, can resist acid rain, salt fog and all kinds of air pollutants, excellent cold and heat resistance, can resist strong ultraviolet radiation, can maintain long-term fadeless, not powder, long service life.

On the market, what is the thickness of aluminum veneer products? This is a concern of many consumers. The thickness of aluminum veneer on the market is 3mm and 2.5mm.

Aluminum veneer thickness of 3mm, in order to strengthen the aluminum veneer surface strength, in the back of the aluminum veneer, must be installed reinforcement, reinforcement made of thick aluminum tape. The screw caps are first welded to the back of the aluminum veneer with a flash welder, and then the aluminum strip drill holes are inserted into the screws and fixed with screws.

Aluminum panel curtain wall, it is to use 3 mm or pure aluminum LF212.5 mm aluminum veneer veneer do curtain wall plate, aluminum sheet for stud welding technology is developing with the development of the stud welding achieved on the back of aluminum veneer decorative surface reinforcement welding stiffener, and does not destroy the aluminum veneer veneer, aluminum veneer easy bending processing into complex shapes, high strength long life (up to 50 years), thus it makes the aluminum panel curtain wall are all rich in processing form and installation structure form.