Aluminum veneer is one of the new building decoration materials widely used in the construction industry. Aluminum veneer is generally treated with chromium and then fluorocarbon spraying. Excellent corrosion resistance and weather resistance, acid rain resistance, salt fog resistance and various air pollutants, excellent cold and heat resistance performance, can resist the strong ultraviolet radiation, can maintain long-term fadeless, not powder, long service life. It is widely used in interior and exterior wall, lobby facade, column decoration, elevated corridor, pedestrian bridge, elevator edge, balcony packaging, advertising signage, interior special-shaped ceiling, etc.

However, in the construction, due to the low stiffness of aluminum veneer, when the aluminum veneer is larger, it is necessary to add reinforcement on the back of the veneer to increase the strength of aluminum veneer. The following aluminum veneer manufacturers will talk about the aluminum veneer reinforcement steps in detail:

1. Stick the double-sided tape of reinforced aluminum square tube to the back of aluminum veneer. The two ends are fixed on the auxiliary cabinet with aluminum Angle piece anti-aluminum square pipe.

2. Glue the structural adhesive of aluminum square tube with aluminum veneer on the back, and then fix the aluminum square tube on the auxiliary frame with aluminum Angle sheets at both ends.

3. Firstly, weld the bolt head on the back of the aluminum plate with the flash welding machine, and then drill the aluminum square pipe into the bolt, and then fix it with the nut. Attach the two ends to the auxiliary frame with corner pieces.

4, aluminum veneer has the advantages of high strength and easy to process into a complex shape, but its stiffness must be strengthened by the back reinforcement, to meet the requirements of the surface deformation of the wallboard.

In the aluminum veneer with reinforcement, better improve the strength of aluminum veneer, aluminum veneer has been more widely used.